Ultrasonic beauty instrument IC solution development with negative ion beauty instrument solution

Ultrasonic beauty instrument IC solution development with negative ion beauty instrument solution

1. Product overview

1. With color light function, blue, green and red three-color light

2. With high frequency atomization function, ultrasonic transducer, water atomization

3. With micro current function, with positive and negative ions

4. Six indicator lights: power supply, sound wave, nutrition introduction, deep cleansing, brightening and moisturizing, firming and wrinkle removal

5. Five buttons: on/off, light care, sonic SPA, ion care, care combination

6. A buzzer

7. Working voltage: 5V 1AA adapter

Second, the development of the IC program of ultrasonic beauty instrument with negative ion beauty instrument program operating instructions

1. The buzzer will beep once when it is powered on.

2. Short press the "ON/OFF" button, the corresponding indicator "Power" will turn on, no matter which state you short press the "ON/OFF" button to turn off the device.

3. Short press the "Light Care" button, the front of the device will turn on a blue light, then short press to turn on the green light, short press again to turn on the red light, and short press again to turn off the lights. Cycle in turn, this button has no corresponding indicator light. After working for ten minutes, it will beep and shut down automatically.

4. Short press the "Sonic SPA" button, the indicator light of "Sonic" lights up, and the ultrasound is output at this time. Press the "Sonic SPA" button again, the indicator light of "Sonic" is off, and there is no ultrasonic output. After ten minutes of work, there will be a beep and the power will be automatically turned off. If you want to continue using it, you need to press the "On/Off" button.

5. Short press the "Ion Care" button, the cycle is positive ion introduction, negative ion introduction, and off. The indicator light of "deep cleaning" is on during positive ion introduction, and the indicator of "nutrition introduction" is on and off during negative ion introduction. When the indicator light is off. The micro current is also conducted through the electroplating key and the ultrasonic head on the back of the product. When the micro current starts and works, it will make a beep every 5 seconds. After ten minutes of work, there will be a beep and the power will be automatically turned off. If you want to continue using it, you need to press the "On/Off" button.

6. Light treatment, sonic SPA, ion treatment, can be used alone or in combination. After confirming the use, the function will start to count, and the power will be turned off automatically after ten minutes. If you need to continue using it, press " power button. If the light care, sonic wave SPA, ion care, and care combination buttons are turned off, it will not be turned off by timing. The power indicator is always on.

7. Short press the "Care Combination" button to cycle in turn to whitening and moisturizing, firming and removing wrinkles, and off. The brightening and moisturizing functions are ultrasonic, negative ion, and color light (red, green, and blue). (Frequency blinking) There is output at the same time. At this time, the "Bright White Replenishing Water" indicator is on, and other corresponding indicators are also on. The function of tightening and removing wrinkles is ultrasonic, positive ion, and color light (red, green, and blue lights flashing at a frequency of 2 times per second at the same time). At this time, the "firming and removing wrinkles" indicator is on. When shutting down, all functions are turned off without turning off the power. When working, a beep will be heard every 5 seconds. After ten minutes, there will be a beep and the power will be turned off automatically (if the gear selection is not turned on, the power will not be turned off automatically), if you want to continue using it, you need to press the on/off button. In this mode, pressing other independent functions will not respond.