1. 你的位置
  2. Home page
  3. Prouduct
  4. PCBA Assembly
Double Sided PCB Fabrication And Assembly

Double Sided PCB Fabrication And Assembly

Capability - SMTLines9 (5 Yamaha, 4 KME)Capacity52 million placements per monthMax Board Size457 X 356mm. (18” x 14”)Min Component size0201 – 54 sq. mm. (0.084 sq. inch), long connector, CSP, BGA, QFP

  • Model： Double Sided PCB Fabrication And Assembly
Online Inquiry

Capability - SMT

Lines

9 (5 Yamaha, 4 KME)

Capacity

52 million placements per month

Max Board Size

457 X 356mm. (18” x 14”)

Min Component size

0201 – 54 sq. mm. (0.084 sq. inch), long connector, CSP, BGA, QFP

Speed

0.15 sec/chip, 0.7 sec/QFP

Capability - PTH

Insertion Type

# of Lines

Capacity (points/mth)

Max Board Size

Lead Pitch

Jumper Wire

3

6 million

330X250 mm (13” x 9.8)

5-30 mm

Axial

3

6 million

457x559 mm (18” x 22”)

5-20 mm

Radial

3

9 million

457x559 mm (18” x 22”)

0.36-21.5 mm

Wave Soldering

Wave Soldering

2

Max board width

400 mm

Type

Dual wave

Pbs Status

Lead-free line support

Max temp

399 degree C

Spray flux

add-on

Pre-heat zones

3

Detailed Terms for Pcb Assembly

Type of  Assembly

THD (Thru-Hole Device), SMT (Surface-Mount Technology), Double-sided SMT & THD mixed

Solder Type

Water Soluble Solder Paste,Leaded and Lead-Free.

Components

Passives parts, smallest size 0201;
BGA, uBGA, QFN, POP, and Leadless chips;
Fine Pitch to 0.8Mils;
BGA Repair and Reball; Part Removal and Replacement
Connectors and terminals.

File Formats

Bill of Materials Gerber Files Pick-N-Place File(XYRS).

Type of Service

Turn-Key, Partial Turn-Key or Consignment.

Component Packaging

Reels,cut tape,Tube and tray,Loose parts and bulk.

Testing

X-ray Inspection
AOI (Automated Optical Inspection)
ICT (In-Circuit Test)/Functional Testing

 

*PCB or PCB Assembly files requests

1. Gerber files of the bare PCB board 
2. BOM (Bill of material) for assembly (To short the lead time, please kindly advise us if there is any acceptable components substitution. )

3. Testing Guide & Test Fixtures if necessary 
4. Programming files & Programming tool if necessary 
5. Schematic if necessary

(Components for your PCBA project can be supplied in any one or more approaches above.

We order genuine parts from your designated suppliers or our partner companies including DigiKey, Mouser, Arrow, Avnet, Future Electronics, Farnell.etc)